You are currently viewing Houston New Construction Walk-Through: What to Check Before You Get the Keys

Houston New Construction Walk-Through: What to Check Before You Get the Keys

Buying a newly built home feels exciting. Your final walk-through helps you spot issues before move-in.

When you’re exploring new construction homes Houston has to offer, remember: new doesn’t always mean finished perfectly. Doors may need adjusting. A fixture may not work. A promised detail may still be missing.

We’re here to help you walk through calmly and keep a clear record. Use this checklist alongside your builder’s process and the terms of your purchase agreement.

Start with a simple room-by-room plan

Bring your signed selections or specifications, a phone, a flashlight, and a notepad. If you can, walk through with the utilities on and give yourself enough time to check each room.

Follow the same route each time. That makes it easier to catch missed details and confirm fixes later.

As you go, note the room, exact location, and what you observed. Take a photo or short video when it helps show the issue.

Check doors and windows

Open, close, and latch every door and window. Try locks and handles, too. A door that sticks or won’t latch deserves a note.

Look for:

  • Gaps around doors, damaged weatherstripping, or loose hardware
  • Windows that are difficult to open, close, or lock
  • Cracked or scratched glass, damaged screens, or visible fogging
  • Uneven door gaps or rubbing along the floor or frame
  • Missing or damaged trim around openings

Check the door between the garage and home, plus the garage door and its opener. Don’t force anything that feels unsafe or jammed. Add it to your written list for the builder to review.

Run the plumbing

Turn on every faucet and shower. Flush each toilet. Run water long enough to check drainage, and look underneath sinks while the water is running.

Watch for drips, slow drains, loose handles, or water pooling around a fixture. Check hot and cold settings, too. Run more than one fixture at once, if practical, and note any change in flow.

Look closely at:

  • Cabinets and floors beneath sinks
  • Tub and shower edges, grout, and caulk
  • Toilet bases and nearby flooring
  • Laundry connections and appliance water lines
  • Exterior faucets and visible drainage areas

A quick glance can miss a slow leak. Give fixtures time to run, then look again.

Buyer and inspector checking plumbing beneath a kitchen sink

Test outlets, lights, and installed fixtures

Flip each light switch and check installed lights and ceiling fans. Test accessible outlets with a receptacle tester, or ask your inspector to check them. Avoid opening electrical panels or removing covers yourself.

Press the test and reset buttons on accessible GFCI outlets. These are often found near sinks, outside, and in garages. Note any outlet or fixture that doesn’t respond as expected.

Check smoke and carbon monoxide alarms using their test buttons. Also check doorbells and other included fixtures. If you ordered specific lighting, wiring, or other options, compare what you see with your signed selections.

Operate the appliances

Confirm which appliances the builder agreed to include. Then test each accessible one using its regular controls.

Check the oven, cooktop, microwave, dishwasher, range hood, and garbage disposal. If included, check the refrigerator, washer, dryer, and garage opener. Look for missing parts, visible damage, unusual sounds, or leaks during operation.

For each appliance, confirm that its model and finish match your selections. Make a list of missing manuals, accessories, remotes, or other promised items.

Look over finishes and small details

Cosmetic details matter, even when everything works. Take a slow look at walls, floors, cabinets, counters, and trim in good light.

Note chipped tile, scratched flooring, uneven transitions, paint marks, dents, unfinished caulk, or damaged cabinet fronts. Open and close cabinet doors and drawers. Check that handles, shelves, and other included details are present.

Keep the notes specific. “Kitchen issue” is hard to follow up on. “Chip on the counter beside the sink” gives the builder a clear place to start.

Walk outside and check drainage

Take a careful look around the house and yard. Notice whether the ground appears to slope away from the home. Check for standing water, erosion, blocked drains, or downspouts that release water close to the foundation.

Look at visible exterior caulking, siding, brick, trim, screens, and hose faucets. Note anything damaged, loose, incomplete, or different from your signed plans.

A walk-through is only a visual check. It won’t tell you everything about underground drainage or hidden construction. If you spot a concern, document it and ask the builder to review it.

Buyer and inspector reviewing yard slope and downspout near a new home

Document issues and request written follow-up

A clear punch list makes follow-up easier. For each item, write down:

  • The room or outdoor location
  • What you observed
  • A photo number or short video, if useful
  • What correction or review you’re requesting
  • The builder’s written response and expected follow-up date

For example: “Hall bathroom, beside the tub: caulk gap along the back edge. Please review and confirm the correction in writing.”

Share the list with the builder through the communication channel they specify. Ask for written confirmation of the next step. Keep your photos, messages, selections, and inspection report together.

When the builder says an item is complete, check it again. If you can’t verify it during the walk-through, ask how and when you’ll be able to confirm it. Review your purchase documents and consult your real estate professional about any contract questions or deadlines.

Homebuyer documenting a punch-list item with a phone and clipboard

Why an independent inspection can still help

The builder’s walk-through and an independent home inspection serve different purposes. Your builder can review the home’s finish details and record requested corrections. An independent inspector can provide a separate assessment of accessible systems and components.

Texas inspectors follow the Texas Real Estate Commission’s Standards of Practice. TREC also cautions consumers that abbreviated walk-through inspections may not follow those standards or provide a full picture of a home’s condition. Read its consumer guidance on property inspections.

Ask a Texas-licensed inspector what their inspection covers and what it doesn’t. A standard inspection is a visual review, not a guarantee that every issue will be found. It can still give you another useful set of eyes before closing.

Keep your next step simple

A careful walk-through helps you note what needs attention and get clear follow-up. Take your time. Test what you can. Put concerns in writing.

At Hou.co, we bring Houston real estate expertise and a friendly, hands-on approach to your home search. Our New Construction Buyer Rebate Program may apply to some homes and communities. Contact our team to discuss your plans and whether a home may qualify.

Leave a Reply